There is also a dyeing step in the construction process of sealed and cured floors in Heze. This step is equally important in construction. Our company is a professional manufacturer of sealed and cured floors in Heze area. Here, I will tell you about its dyeing process. , please read below:
.New cement floor maintenance for two weeks/terrazzo maintenance for one day, clean up the dirt on the concrete floor (such as cement slag, paint blocks, garbage, dust, etc.).
.Clean the ground thoroughly with water. When the ground is more than 80% dry, you can apply the concrete sealing and curing agent. Spray the product on the ground at an amount of about .3㎏/㎡, and push it evenly with dust to allow the curing agent to penetrate into the concrete as much as possible.
.After one hour of construction, if the inspection finds that there is still residual curing agent in a low place, it should be pushed from the low place to a dry area or completely removed from the surface.
.Construction time: about 3 hours. Once the construction is completed, the floor will be dry and ready for walking. After ventilating and drying for 3 days, polish with a resin grinding disc (usually 3-mesh), and the brightness will show a strong luster.
The above is the relevant process for sealing and curing floor dyeing. If you want to perform this operation, you must pay attention to the relevant precautions. What should we pay most attention to when operating? Also, the dyes and dyes we choose The raw materials used must be produced by regular manufacturers, which is a prerequisite for ensuring the quality and quantity of our construction.
Construction process of Heze sealed and cured floor dyeing